Sheaths
Sheaths
|
At long last, I have found a good quality
American Made leather sheath that will compliment and protect your work of
art. These are made from top quality 8-9 oz. tanned leather and are
supplied unfinished. You'll need to case these ( wetted) and formed to
your individual knife. After that you can stain. emboss, embellish, seal
and finish to suit your individual taste. Lot of room for creativity here. |
|
|
|||||
|
Pouch
Sheaths Although this series of sheaths will fit a wide variety of blades, I tried to help by supplying the names of some of the blades I carry that will fit these nicely. Use this as a guide to size a particular sheath to your knife. Yes, they do have a belt loop on the back. Click HERE |
|||||
| NCK611PS |
Blades to 3" - 3 1/2" long |
5" x 1 1/2" | $ 16.50 | ||
| NCK401PS | Tomcat | 5 1/2" x 1 1/2" | $ 16.50 | ||
| NCK401PS | Panther | 5 1/2" x 1 1/2" | $ 16.50 | ||
| NCK401PS | Bobcat | 5 1/2" x 1 1/2" | $ 16.50 | ||
| NCK401PS | Cougar | 5 1/2" x 1 1/2" | $ 16.50 | ||
| NCK401PS | Riverboat Rita | 5 1/2" x 1 1/2" | $ 16.50 | ||
| NCK401PS | Mongoose | 5 1/2" x 1 1/2" | $ 16.50 | ||
| NCK301PS |
Piranha Note: Waiting for next shipment |
6 1/2" x 1 3/4" | $ 16.50 | ||
| NCK301PS |
Barracuda
|
6 1/2" x 1 3/4" | $ 16.50 | ||
| NCK301PS |
Falcon Note: Waiting for next shipment |
6 1/2" x 1 3/4" | $ 16.50 | ||
| NCK301PS |
Moray
Skinner Note: Waiting for next shipment |
6 1/2" x 1 3/4" | $ 16.50 | ||
| NCK111PS |
Eagle
|
6 3/4" x 1 3/4" | $ 16.50 | ||
| NCK201PS | Texas Bowie | 7 1/2" x 1 7/8" | $ 16.50 | ||
| NCK101PS |
6"
Fillet |
9 1/2" x 1 3/8" | $ 19.50 | ||
| NCK711PS |
Trout Fillet Note: Waiting for next shipment |
6 1/2" x 1" | $ 16.50 | ||
| NCK101PS |
7"
Fillet |
9 1/2" x 1 3/8" | $ 19.50 | ||
| NCK421 |
Swordfish
Fillet |
13 1/2" x 1 3/8" | $ 21.50 | ||
|
|
|||||
|
Strap
Sheaths This particular sheaths come with an attached strap to hold your knife tightly and securely in place. Half of the snap is already attached to the front of the sheath, but the other included half will need to be attached on the strap after custom fitting to your individual blade. This way you will be assured of a perfect, tight, custom fit. If you don't already have a Snap Setter, I have one listed below. ( If you want to see a picture of the Snap Setter, check out the Sheathmaking Page) |
|||||
| NCK701SS | Cobra | 4" x 1 3/8" | $ 16.50 | ||
| NCK701SS | Badger | 4" x 1 3/8" | $ 16.50 | ||
| NCK701SS | Wolf | 4" x 1 3/8" | $ 16.50 | ||
| NCK701SS | Puma Skinner | 4" x 1 3/8" | $ 16.50 | ||
| NCK701SS | Barracuda | 4" x 1 3/8" | $ 16.50 | ||
| NCK701SS | Rattler | 4" x 1 3/8" | $ 16.50 | ||
| NCK311SS | Northland Skinner | 3" x 1 3/4" | $ 16.50 | ||
| NCK311SS | Ocelot | 3" x 1 3/4" | $ 16.50 | ||
| NCK511SS | Shark | 4 1/2" x 1 3/8" | $ 16.50 | ||
| NCK511SS | Lion Skinner | 4 1/2" x 1 3/8" | $ 16.50 | ||
| aaaa | |||||
|
|
NCK-SNAP-SETTER | Snap Setter and Anvil for setting included snaps |
$ 7.50 |
||
| NCK-NEATSFOOT | Neatsfoot Oil, 8 ounces, for sheath finishing |
$ 5.75 |
|||
